Lab Super Cisco 3

Topologi
Pada Lab Super ini kita akan mengkonfigurasi beberapa materi lab, untuk melakukan Routing antar Router menggunakan EIGRP, untuk mendapatkan alamat IP dynamic PC menggunakan DHCP Server yang akan dikonfigurasikan pada Router dan MLS, kita juga akan membuat AP untuk menghubungkan laptop yang menggunakan Wireless, untuk pengujian jaringan ini kita akan membuat DNS Server dan Web Server yang nantinya akan diakses.

Konfigurasi Bagian 1


Pada bagian satu kita berkonsentrasi untuk mengkonfigurasi semua Router dan Switch atau perangkat Intermediary, konfigurasinya berupa IP Address, Routing EIGRP dan DHCP Server.

    IP Address R1

    Konfigurasi IP Address berdasarkan nomor Router agar lebih mudah, misalnya pada interface R1 yang mengarah R2 maka IP Address-nya 12.12.12.1. 
    R1(config)#int g0/0
R1(config-if)#ip add 111.111.111.1 255.255.255.0
R1(config-if)#no sh
R1(config-if)#exit
R1(config)#int s0/0/0
R1(config-if)#clock rate 4000000
R1(config-if)#ip add 12.12.12.1 255.255.255.0
R1(config-if)#no sh
R1(config-if)#exit

    EIGRP R1

    R1(config)#router eigrp 1
R1(config-router)#no auto-summ
R1(config-router)#net 111.111.111.0 0.0.0.255
R1(config-router)#net 12.12.12.0 0.0.0.255
R1(config-router)#exit

    IP Address R2

    R2(config)#int s0/0/0
R2(config-if)#ip add 12.12.12.2 255.255.255.0
R2(config-if)#no sh
R2(config-if)#exit
R2(config)#int s0/0/1
R2(config-if)#clock rate 4000000
R2(config-if)#ip add 23.23.23.2 255.255.255.0
R2(config-if)#no sh
R2(config-if)#exit
R2(config)#int g0/0
R2(config-if)#ip add 21.21.21.2 255.255.255.0
R2(config-if)#no sh
R2(config-if)#exit
R2(config)#int s0/1/0
R2(config-if)#clock rate 4000000
R2(config-if)#ip add 24.24.24.2 255.255.255.0
R2(config-if)#no sh
R2(config-if)#exit

    EIGRP R2

    R2(config)#router eigrp 1
R2(config-router)#no auto-summ
R2(config-router)#net 21.21.21.0 0.0.0.255
R2(config-router)#net 23.23.23.0 0.0.0.255
R2(config-router)#net 24.24.24.0 0.0.0.255
R2(config-router)#net 12.12.12.0 0.0.0.255
R2(config-router)#exit

    IP Address R3

    R3(config)#int s0/0/0
R3(config-if)#ip add 23.23.23.3 255.255.255.0
R3(config-if)#no sh
R3(config-if)#exit
R3(config)#int g0/0
R3(config-if)#ip add 113.113.113.1 255.255.255.0
R3(config-if)#no sh
R3(config-if)#exit
R3(config)#int g0/1
R3(config-if)#ip add 123.123.123.1 255.255.255.0
R3(config-if)#no sh
R3(config-if)#exit

    EIGRP R3

    R3(config)#router eigrp 1
R3(config-router)#no auto-summ
R3(config-router)#net 113.113.113.0 0.0.0.255
R3(config-router)#net 123.123.123.0 0.0.0.255
R3(config-router)#net 23.23.23.0 0.0.0.255
R3(config-router)#exit

    DHCP R3

    Konfigurasi DHCP Server pada Router ini untuk memberikan alamat IP Dynamic untuk PC 
    R3(config)#ip dhcp pool net30
R3(dhcp-config)#network 113.113.113.0 255.255.255.0
R3(dhcp-config)#default-router 113.113.113.1
R3(dhcp-config)#dns-server 111.111.111.2
R3(dhcp-config)#exit

    IP Address R4

    R4(config)#int s0/0/0
R4(config-if)#ip add 24.24.24.4 255.255.255.0
R4(config-if)#no sh
R4(config-if)#exit
R4(config)#int g0/1
R4(config-if)#ip add 30.30.30.1 255.255.255.0
R4(config-if)#no sh
R4(config-if)#exit
    Kemudian konfigurasi sub-interface untuk menghubungkan VLAN 
    R4(config)#int g0/0.10
R4(config-subif)#encapsulation dot1q 10
R4(config-subif)#ip add 10.10.10.1 255.255.255.0
R4(config-subif)#exit
R4(config)#int g0/0.20
R4(config-subif)#encapsulation dot1q 20
R4(config-subif)#ip add 20.20.20.1 255.255.255.0
R4(config-subif)#exit
R4(config)#int g0/0
R4(config-if)#no sh

    EIGRP R4

    R4(config)#router eigrp 1
R4(config-router)#no auto-summ
R4(config-router)#net 10.10.10.0 0.0.0.255
R4(config-router)#net 20.20.20.0 0.0.0.255
R4(config-router)#net 30.30.30.0 0.0.0.255
R4(config-router)#net 24.24.24.0 0.0.0.255
R4(config-router)#exit

    DHCP R4

    R4(config)#ip dhcp pool vlan10
R4(dhcp-config)#net 10.10.10.0 255.255.255.0
R4(dhcp-config)#default-router 10.10.10.1
R4(dhcp-config)#dns-server 111.111.111.2
R4(dhcp-config)#exit
R4(config)#ip dhcp pool vlan20
R4(dhcp-config)#net 20.20.20.0 255.255.255.0
R4(dhcp-config)#default-router 20.20.20.1
R4(dhcp-config)#dns-server 111.111.111.2
R4(dhcp-config)#exit
R4(config)#ip dhcp pool vlan30
R4(dhcp-config)#net 30.30.30.0 255.255.255.0
R4(dhcp-config)#default-router 30.30.30.1
R4(dhcp-config)#dns-server 111.111.111.2
R4(dhcp-config)#exit

    VLAN, Trunk SW1

    SW1(config)#int g0/1
SW1(config-if)#sw mo tr
SW1(config-if)#exit
SW1(config)#vlan 10
SW1(config-vlan)#name sepuluh
SW1(config-vlan)#exit
SW1(config)#vlan 20
SW1(config-vlan)#name duapuluh
SW1(config-vlan)#
SW1(config-vlan)#exi
SW1(config)#int f0/1
SW1(config-if)#sw mo acc
SW1(config-if)#sw acc vl 10
SW1(config-if)#exit
SW1(config)#int f0/2
SW1(config-if)#sw mo acc
SW1(config-if)#sw acc vl 20
SW1(config-if)#exit

    IP Address MLS-1

    MLS-1(config)#int g0/1
MLS-1(config-if)#no sw
MLS-1(config-if)#ip add 21.21.21.1 255.255.255.0
MLS-1(config-if)#exit
MLS-1(config)#int vl 1
MLS-1(config-if)#ip add 40.40.40.1 255.255.255.0
MLS-1(config-if)#exi

    EIGRP MLS-1

    MLS-1(config)#ip routing
MLS-1(config)#router eigrp 1
MLS-1(config-router)#no auto-summ
MLS-1(config-router)#net 40.40.40.0 0.0.0.255
MLS-1(config-router)#net 21.21.21.0 0.0.0.255
MLS-1(config-router)#exit
    lalu kita dapat melihat hasilnya 
    MLS-1(config)#do sh ip ro
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
       * - candidate default, U - per-user static route, o - ODR
       P - periodic downloaded static route

Gateway of last resort is not set

     10.0.0.0/24 is subnetted, 1 subnets
D       10.10.10.0 [90/2172672] via 21.21.21.2, 00:08:22, GigabitEthernet0/1
     12.0.0.0/24 is subnetted, 1 subnets
D       12.12.12.0 [90/2170112] via 21.21.21.2, 00:08:22, GigabitEthernet0/1
     20.0.0.0/24 is subnetted, 1 subnets
D       20.20.20.0 [90/2172672] via 21.21.21.2, 00:08:22, GigabitEthernet0/1
     21.0.0.0/24 is subnetted, 1 subnets
C       21.21.21.0 is directly connected, GigabitEthernet0/1
     23.0.0.0/24 is subnetted, 1 subnets
D       23.23.23.0 [90/2170112] via 21.21.21.2, 00:08:22, GigabitEthernet0/1
     24.0.0.0/24 is subnetted, 1 subnets
D       24.24.24.0 [90/2170112] via 21.21.21.2, 00:08:22, GigabitEthernet0/1
     30.0.0.0/24 is subnetted, 1 subnets
D       30.30.30.0 [90/2170368] via 21.21.21.2, 00:08:22, GigabitEthernet0/1
     111.0.0.0/24 is subnetted, 1 subnets
D       111.111.111.0 [90/2172672] via 21.21.21.2, 00:08:22, GigabitEthernet0/1
     113.0.0.0/24 is subnetted, 1 subnets
D       113.113.113.0 [90/2172672] via 21.21.21.2, 00:08:22, GigabitEthernet0/1
     123.0.0.0/24 is subnetted, 1 subnets
D       123.123.123.0 [90/2172672] via 21.21.21.2, 00:08:22, GigabitEthernet0/1

    DHCP MLS-1

    MLS-1(config)#ip dhcp pool net40
MLS-1(dhcp-config)#net 40.40.40.0 255.255.255.0
MLS-1(dhcp-config)#default-router 40.40.40.1
MLS-1(dhcp-config)#dns-server 111.111.111.2
MLS-1(dhcp-config)#exi

Konfigurasi Bagian 2

Pada bagian yang kedua kita akan mengkonfigurasi End Devices seperti Server PC dan Laptop.

    Konfigurasi Server

    Ada DNS Server dan Web Server, fungsi DNS untuk membuat URL dan Web Server untuk penyedia konten

    Web Server


    DNS Server




    PC dan Laptop

    Konfigurasi PC dan Laptop tinggal request DHCP untuk mendapatkan alamat IP.


    Setelah itu coba akses url web server yang sudah dibuat sebelumnya.

Komentar

Posting Komentar